Type G-GB Single Joint

Type G-GB Single Joint

Available in 4 variants. Technical specifications can be found in the PDF on this page.

The Mario Ferri Universal Joint G program is provided with sliding bushes. These joints are also called plain bearings. They all consist of a star wheel core and 2 half-joints with fork ends. Between the pins of the star wheel and the holes of the forks, 4 wear-resistant sliding bushes, are fitted in. Joints with plain bearings – G series – are for middle-low speeds and where there are shock loads. All stress and wear-resistant parts are made of nickel-plated alloy steel, cemented and hardened. The inside of the joint’s vein is of a good working steel. In addition, a stainless steel series is available.

These joints are available in 2 versions:

• G version to DIN 808
• GB version to DIN 808/7551

Features of these G serie plain bearings

• High efficiency; Silent running; Low friction coefficient
• All rubbing surfaces are hardened and ground.
• Maximum working angle is 45° for single joints and 90° for double joints.
• Maximum speed is 1000 R.P.M. for G series
• All these joints are also supplied in telescopic version.

Other products than universal joints

Due to our large assortment, there is almost always a product that is suitable for your applications. We not only supply drive components, but also all the other products needed to achieve an optimal process. In our stockpile we have, for example, various types of transport components, hydraulic components, oil coolers and our own monitoring system the Beegle. Do you want to know more about a product or do you have a question? Our specialized sales engineers will be happy to assist you in finding the best product needed for you technical challenge. Feel free to contact us if you have questions or seek information.